Polymer Testing Lab
1. Abrasion Tester to estimate the resistance of plastics to surface abrasion
2. Brittleness Temperature Tester to determine the temperature at which plastic exhibit brittle failure under specific conditions
3. Capillary Rheometer to determine the shear viscosity of polymer melt
4. Environmental Stress Cracking Tester to determine the stress cracking resistance of plastics under specific conditions
5. Fiber/Film Shrinkage Tester to measure the shrinkage condition of textile or fibers
6. Film Friction/Slip Tester to measure the co-efficient of friction of plastic film or paper
7. Haze-Gloss Tester to measure the specular gloss and reflection haze
8. HDT/Vicat to determine the softening point of the specimens
9. Insulation Tester use for testing electric strength of solid insulating materials
10. Melt Flow Index Tester to determine the melt flow index of polymers
11. Pendulum Impact Tester to determine the resistance to breakage of plastics by the energy extracted from pendulum-type hammer
12. Pneumatic Punch to prepare plastics test specimens
13. Puncture Tester for testing mechanical properties of materials at low load
14. Rockwell Hardness Tester to measure the materials hardness
15. Salt spray tester to test the corrosion resistance of metallic substances
16. Shore A,D Durometer to measure the hardness of the specimens
17. Thickness gauge to measure materials thickness
18. Universal Testing Machine to determine the film blocking and slip
19. Universal Testing Machine for testing mechanical properties of materials at high loads
20. Universal Testing Machine for testing mechanical properties of materials at low loads
21. Weatherometer to test plastic sample in various conditions of weather
22. Elmendorf Tear Tester to test the tearing of plastic sheets or films
23. Gas Permeability Tester to test permeability of gas through polymer film
Polymer Processing Lab
1. Blow Moulding to produce hollow articles
2. Blown Film Extruder to produce double layer film
3. Chill Roll Cast Film to produce single layer film
4. Compression Press to form the appropriate specimen by using the heat and pressure
5. Grinding Machine to grind the plastics
6. Injection Moulding Machine to produce intricately-shaped plastics with high speed
7. High Speed Mixer to mix plastics
8. Twin Screw Extruder to grind and mix plastic samples together
9. Tube & Profile Extruder to produce the plastic product in tube & profile shape
10. Two Roll Mills use to mix polymer with additives
11. Plasti-Corder to determine rheological and physical properties of plastics
Equipments for Applications of Polymer / Petrochemical & Plastics
1. Melt Flow Index:
Used for measuring melt flow rate ( MFI) and melt volume rate (MVR) on Thermo plastics raw materials and compounds.
2. Automatic Rheometer:
Used for studying the rheological behavior and Melt Flow of Thermo Plastic Materials.
3. HDT / VICAT:
Used for determine the Deflection Temperature under load and Vicat Softening Temperature of Thermoplastic materials.
4. Impact Testers:
We can offer Pendulum Impact Tester as well as Drop Impact Testers. These are used for determining the impact resistance of plastic and other equivalent materials.
5. Dynamic Fatigue
6. Universal Tensile Machine:
Used for measuring tensile force, Compression force and bending force .
7. Hardness Tester:
Used for measuring hardness rate of Plastic, PVC, Rubber.
8. Ring Stiffness Tester:
Used for Determination of Ring Stiffness rate of Plastic Pipes.
9. Hydrostatic Pressure Test System:
Used for Determination of Crack Resistance Rate of Plastic Pipes against with different Hydrostatic Pressure.
10. Tear Tester:
Used for determination the Tearing Resistance
11. Pneumatic & Manual Die Cutter:
Used for preparing specimen standard for tensile & HDT- VICAT and Impact Tester.
12. Ozone Test Chamber:
Used for measurement and control of temperature ,Relative Humidity and Ozone by UV Absorption and Electrochemical Analyzer.